Author Topic: Mr. Rogers 62  (Read 6315 times)

Offline Jeffrey A. Rogers

Re: Mr. Rogers 62
« Reply #70 on: January 07, 2018, 10:29:37 PM »
And soon discovered something.  The passenger side doohickey is an inch wider than the drivers side.   WHY!!??
What is frozen cannot rust is a damn lie!

Offline Jeffrey A. Rogers

Re: Mr. Rogers 62
« Reply #71 on: January 07, 2018, 10:53:59 PM »
Test fitted the model.  Looks OK to me.
What is frozen cannot rust is a damn lie!

Offline Jeffrey A. Rogers

Re: Mr. Rogers 62
« Reply #72 on: January 07, 2018, 10:56:09 PM »
Flattened out the model. Ready to cut out some new pieces.
I hope this works. :)
What is frozen cannot rust is a damn lie!

Offline 62droptop

  • 61-62 Cadillacs Owners Group
  • *****
  • Posts: 800
  • Total likes: 119
  • 62 series 62 droptop southern ontario canada
Re: Mr. Rogers 62
« Reply #73 on: January 10, 2018, 10:53:51 PM »
Flattened out the model. Ready to cut out some new pieces.
I hope this works. :)

I love the hi tech CAD process you are using

I use CAD(cardboard aided design) all the time as well

just like john cash,your car is coming together one piece at a time

how cold is it up there lately?
 
1962 Cadillac series 62 ragtop

driven like it is stolen
broken because it was driven(still)

Offline Cattle Axe

Re: Mr. Rogers 62
« Reply #74 on: January 11, 2018, 10:41:32 AM »
Sell the templates so we can all use them?
1961 Series 62 Convertible
1962 Coupe Deville

"I got my self a cadillac but I can't afford the gasoline" (AC/DC down payment blues)

Offline Jeffrey A. Rogers

Re: Mr. Rogers 62
« Reply #75 on: January 13, 2018, 12:35:44 PM »
Lately itís been reasonable, about -15 F.


I suppose I could lay that out on gridded paper, scan it, and post it.  I donít need to sell that.  Good idea though.


Jeff



What is frozen cannot rust is a damn lie!

Offline Jeffrey A. Rogers

Re: Mr. Rogers 62
« Reply #76 on: Yesterday at 09:21:13 PM »
Worked really hard, cut out the last bit of rust, and landed the rear quarters, ĎAí pillars, and window frame onto the fire wall and floor of the sedan.  Iíve waited a couple years to do this.
What is frozen cannot rust is a damn lie!

Offline Jeffrey A. Rogers

Re: Mr. Rogers 62
« Reply #77 on: Today at 01:02:46 PM »
Rocker Panel Front Tip Pattern

Pretty rough, but if you print these on 11X17 paper, you've got a great start.  Remember, this pattern is for the passenger side.

Jeff
What is frozen cannot rust is a damn lie!