Author Topic: Needing dimensions?  (Read 293 times)

Offline 6Caddy2

Needing dimensions?
« on: May 05, 2018, 04:54:39 PM »
Hello guys, I was wondering if anyone has the cut size for the mastilated rubber for the sway bar pieces, I know they sell them pre-cut but I bought a sheet of the mastilated rubber and have enough left over to cut my own, thank you for any info or sizes! Joe

Offline 62 driver

Re: Needing dimensions?
« Reply #1 on: May 05, 2018, 09:50:26 PM »
Joe,  can you post a photo of what you need. Even if itís from the internet.  I have a uninstalled kit and could send you a paper copy of it if I have it and I new what to look for. Dave

Offline 6Caddy2

Re: Needing dimensions?
« Reply #2 on: May 05, 2018, 11:41:08 PM »
Ok Dave, will do, it will be the rectangle pieces. I'll look for the pictures on the net and post them for you, thanks Dave, I'll send you the upper spring pads soon, got busy putting the caddy back together. Thanks again! Here's a few photos of my progress Dave. Joe

Offline 6Caddy2

Re: Needing dimensions?
« Reply #3 on: May 05, 2018, 11:46:21 PM »
Ok Dave here they are.Thanks again for taking the time to look through your kit! Joe

Offline 62 driver

Re: Needing dimensions?
« Reply #4 on: May 08, 2018, 08:08:13 PM »
Joe,  Sorry my new kit does not have this part in it. I have the 61-62 14 piece splash apron kit. I guess I need this as well. Dave

Offline 6262

Re: Needing dimensions?
« Reply #5 on: May 08, 2018, 11:39:20 PM »
Where do these parts actually go? Do you have a picture of them when installed?

Offline 6Caddy2

Re: Needing dimensions?
« Reply #6 on: May 09, 2018, 07:58:44 PM »
Thanks Dave for checking your kit for me, my kit didn't have them either, you think they would include it in the kit🤔Go figure though.
6262, the splash shields in question go on the frame, mounting from the front to rear, it will go over the sway bar there are two holes in the frame where the screws will go, I'll take a photo after dinner for you 6262

Offline 6Caddy2

Re: Needing dimensions?
« Reply #7 on: May 09, 2018, 08:08:52 PM »
Here you go 6262