Author Topic: 1956 Series 62 Coupe restoration, engine, transmission question  (Read 2143 times)

Offline harascho

Re: 1956 Series 62 Coupe restoration, engine, transmission question
« Reply #20 on: December 23, 2017, 12:49:32 PM »
Looking back it still was fun rebuilding things from scratch. Sometimes I only had pictures and a hand ful of rust to start with. The floor braces came out nice.

cheers
Harald

Online South_paw

Re: 1956 Series 62 Coupe restoration, engine, transmission question
« Reply #21 on: December 23, 2017, 02:00:25 PM »
The rear body mounts in the trunk area are as follows. You have the two on the wheelhouse, one on each side and then the two on the trunk floor near the rear valance. Four bolts go in from the top side and they screw into a cage nut in the chassis. The two bolt heads on the wheelhouses are visible in the trunk when the trunk is finished. The two on the trunk floor will be covered by the carpet. The wheelhouse mounts do not have a supporting brace. Hope that helps.
 
Lou
1956 Eldorado Biarritz
CLC Member since 2001 (Unlisted in Directory)



*** Check out the 1956 Eldorado Biarritz Survivor Roster. Click here ***