Author Topic: Carl's 61 Fleetwood  (Read 22155 times)

Offline rare eldorado

Re: Carl's 61 Fleetwood
« Reply #310 on: August 27, 2017, 08:59:21 AM »
Carl Bead blasting will not hurt the hinges or the pins .If you need new pins ,,usa parts or opgi has some kits .there are also other supplyers that sell replacement pins.Most times it is the drivers door that would need new pins ...not always .If you are bead blasting it is best to use glass .With the quality of your restoration do you have a blast cabnet or send it out ?

Offline Clewisiii

  • 61-62 Cadillacs Owners Group
  • *****
  • Posts: 1548
  • Total likes: 575
  • Carl Crittenden Flushing MI
Re: Carl's 61 Fleetwood
« Reply #311 on: August 27, 2017, 09:04:36 AM »
Yes. I have a blast cabinet with glass beads. My cabinet light fixture went out yesterday. So I am taking a breather and looking at the sheet metal.
"My interest is in the future because I am going to spend the rest of my life there."
Charles Kettering

Offline Clewisiii

  • 61-62 Cadillacs Owners Group
  • *****
  • Posts: 1548
  • Total likes: 575
  • Carl Crittenden Flushing MI
Re: Carl's 61 Fleetwood
« Reply #312 on: August 27, 2017, 09:06:02 AM »
Just for fun.
"My interest is in the future because I am going to spend the rest of my life there."
Charles Kettering

Offline Clewisiii

  • 61-62 Cadillacs Owners Group
  • *****
  • Posts: 1548
  • Total likes: 575
  • Carl Crittenden Flushing MI
Re: Carl's 61 Fleetwood
« Reply #313 on: August 29, 2017, 08:37:04 AM »
I did not think about it till I did this assembly.  But the entire front clip only has one bolt to the frame in the center of the core support. Supporting core support and both fenders.
I guess I did not pay that much attention when I disassembled it.
"My interest is in the future because I am going to spend the rest of my life there."
Charles Kettering

Offline Clewisiii

  • 61-62 Cadillacs Owners Group
  • *****
  • Posts: 1548
  • Total likes: 575
  • Carl Crittenden Flushing MI
Re: Carl's 61 Fleetwood
« Reply #314 on: August 29, 2017, 08:23:33 PM »
From time to time I ask myself why am I putting in this much effort.  It is a Fleetwood.  It will not be valuable.  And I am a novice so I am not even doing the "right" way with the best of quality anyway. 

So why don't I just fill the rust holes with bondo.  Why do all this on something that will not be worth it.

I guess it is pride and practice.   I like challenging myself.  And I like learning.  Maybe the next one will be an Eldorado with factory air.  I will have learned how to restore the AC already.  Once my student loans are paid off it will be the biggest raise in my paycheck in my life.  I could afford to do one of these cars every two years by then.  I hope I will have learned what I needed and will be ready.
"My interest is in the future because I am going to spend the rest of my life there."
Charles Kettering

Offline Clewisiii

  • 61-62 Cadillacs Owners Group
  • *****
  • Posts: 1548
  • Total likes: 575
  • Carl Crittenden Flushing MI
Re: Carl's 61 Fleetwood
« Reply #315 on: September 19, 2017, 03:15:49 PM »
I finally got brave enough to bead blast some hinges.  They came out nice. I need to buy a new box of abrasive material.
"My interest is in the future because I am going to spend the rest of my life there."
Charles Kettering