Author Topic: Carl's 61 Fleetwood  (Read 47833 times)

Offline russ austin

Re: Carl's 61 Fleetwood
« Reply #460 on: May 06, 2019, 06:27:54 AM »
Looks like you got it.
63 series 62 4 window sedan, 63 Superior Hearse
62 Fleetwood

Tucson, AZ  USA

Offline Clewisiii

  • 61-62 Cadillacs Owners Group
  • *****
  • Posts: 2137
  • Total likes: 956
  • Carl Crittenden Flushing MI
Re: Carl's 61 Fleetwood
« Reply #461 on: May 06, 2019, 09:10:51 AM »
Honestly I am surprised how fast the learning curve is.
This machine is actually easier to sew on then a regular house hold machine.

At one point I ran a 10 inch seam without even touching the material. Hit the reverse lever back over it. then ran again over the top.

Without even guiding the material it ran a straight seam over itself twice.
The motor is a 3/4 horse power belt drive.
I can actually slow it down to easily sew one stitch at a time.
As long as I do not try to sew fast yet, and have good patterns,  these seats should be no problem.

As with painting most of the work is in the prep.  But  for this I would say it is a 60/40 split.

The fear is making a mistake in the middle of an expensive piece of fabric.  I estimate 10 yard of the pleated fabric to do the seats and doors. The fabric currently cost $159 a yard so $1600 just for the fabric.  I then have to sew all of the 2.5 inch pleats across that fabric without messing up. 5 yards of vinyl at $100 a yard. 20 square feet of leather at $15 a foot puts me to $2400 for just the A surface materials. Thread is $20 a spool per size per color, muslin fabric backing, and various foams you are looking at $3000 in materials for the seats covers. Plus what I have into the springs and powder coating.  Doors and seat back panel add in the pressed board backing.

The carpet and headliner plus extra for sail panels and door bottoms and front seat cover are $2000.

So $5000 in materials.  I hade three quotes from trim shops ranging from $9,000 to $14,000 to do my interior if I provided the material. 

That cost, and the fact that I have an incredible desire to learn, led me to the decision to try to do this myself.
I did not start by buying the material then figure it out. I started by buying the tools and learning how to use them before I buy my actual materials. And in this case the materials cost more then the tools.  I do have a lot of people around me for advice as my company is in the business of vehicle interiors. So that may explain my bravery in tackling this.
"My interest is in the future because I am going to spend the rest of my life there."
Charles Kettering

Offline Clewisiii

  • 61-62 Cadillacs Owners Group
  • *****
  • Posts: 2137
  • Total likes: 956
  • Carl Crittenden Flushing MI
Re: Carl's 61 Fleetwood
« Reply #462 on: May 07, 2019, 05:01:13 PM »
While sitting at my desk today I was hit with an irrational fear for my Fleetwoods rear windshield. It is the only piece of glass I cannot buy new. Since I removed it 5 years ago I have never touched it on the shelf it was on. I was to afraid to break it.

Until now I had not even cleaned it. It was still covered in dirt and the glass setting compound.

Well I cleaned it up and looked it over. A few small scratches but it is near perfect. Now I would like to crate it better before it goes back on the shelf. I will be doing some repairs to my barn this year and I want to make sure this is protected
"My interest is in the future because I am going to spend the rest of my life there."
Charles Kettering

Offline Clewisiii

  • 61-62 Cadillacs Owners Group
  • *****
  • Posts: 2137
  • Total likes: 956
  • Carl Crittenden Flushing MI
Re: Carl's 61 Fleetwood
« Reply #463 on: May 08, 2019, 11:48:22 AM »
Just for fun. Erving the motor.
"My interest is in the future because I am going to spend the rest of my life there."
Charles Kettering

Offline Clewisiii

  • 61-62 Cadillacs Owners Group
  • *****
  • Posts: 2137
  • Total likes: 956
  • Carl Crittenden Flushing MI
Re: Carl's 61 Fleetwood
« Reply #464 on: May 11, 2019, 07:21:13 PM »
My foam shop was kind enough to custom cut a pile of strips for the seat cover pleats.

No I need to find an appropriate fabric to simulate the seat fabric. Hope fully I can test sewing the pleats in the next week.
"My interest is in the future because I am going to spend the rest of my life there."
Charles Kettering

Offline Clewisiii

  • 61-62 Cadillacs Owners Group
  • *****
  • Posts: 2137
  • Total likes: 956
  • Carl Crittenden Flushing MI
Re: Carl's 61 Fleetwood
« Reply #465 on: May 18, 2019, 10:58:37 AM »
Continuing with my test pattern. The muslin and foam is 2.5 inches. The fabric is alternating 1.5 inch strips.

This fabric was the closest to that pattern for the test.
"My interest is in the future because I am going to spend the rest of my life there."
Charles Kettering

Offline Clewisiii

  • 61-62 Cadillacs Owners Group
  • *****
  • Posts: 2137
  • Total likes: 956
  • Carl Crittenden Flushing MI
Re: Carl's 61 Fleetwood
« Reply #466 on: June 11, 2019, 06:55:58 PM »
I have not been doing much with my car in a while.  I need to fix my barn up before i can do much more.
I thought that I had a leak in my roof dripping on the hood and fender of my car.
The hood and fender have started to rust because of it.
I ripped all of my insulation ceiling panels down to look into it.
And the roof was not leaking.
It was raccoon piss running through the panels.
I evicted 4 of them in total.
 Most the entire ceiling is torn down now.  I wire meshed all of the eaves to keep them out.
I hope to have a new ceiling down for this fall.
"My interest is in the future because I am going to spend the rest of my life there."
Charles Kettering

Offline 6262

Re: Carl's 61 Fleetwood
« Reply #467 on: June 12, 2019, 01:47:51 AM »
I have not been doing much with my car in a while.  I need to fix my barn up before i can do much more.
I thought that I had a leak in my roof dripping on the hood and fender of my car.
The hood and fender have started to rust because of it.
I ripped all of my insulation ceiling panels down to look into it.
And the roof was not leaking.
It was raccoon piss running through the panels.
I evicted 4 of them in total.
 Most the entire ceiling is torn down now.  I wire meshed all of the eaves to keep them out.
I hope to have a new ceiling down for this fall.

I hear more and more horror stories about racoons  :)

In Germany they are increasingly a problem because their population is growing fast. It started with 28 racoons in the 1940s, now we have an estimated 1.3 million (without any natural enemy).  ;D

Offline 62 Coupe

Re: Carl's 61 Fleetwood
« Reply #468 on: June 15, 2019, 08:48:14 AM »
That's a bummer. Racoons are fairly new in our area but I have yet to see one. At lower elevations they have been seen. We are at 3,500' and they don't seem to like the cold nights. Where I grew up the elevation was only 400' and there were Racoons everywhere. As far as critters messing with cars, our biggest problem is mice. The easy solution is get a cat. Unfortunately cats don't do well going up against Racoons!
A diamond is merely a lump of coal that did well under pressure. - Unknown -