1962 Coupe de Ville restoration

[MoreRacing]

Welding back side of lower right sill.

[MoreRacing]

 
Welding the sill backside.

[MoreRacing]

 
Sill backside cover welding.

[62 Coupe]

I did the drivers side of my car with steel rod and gas. It isn't bad for the inner bits but slow on the outer body. I saved up and bought a good quality Miller MIG and finished the passengers side in half the time.

Nice job.

[MoreRacing]

I did the drivers side of my car with steel rod and gas. It isn't bad for the inner bits but slow on the outer body. I saved up and bought a good quality Miller MIG and finished the passengers side in half the time.

Nice job.

Right you are. Tlaked to the guy about it. He said He is going to finish the outer panel with the mig welder.
I agree with You. Its faster and a cleaner weld.
Next up...the floor pan.   

[Ramses]

Two weeks ago, my brother have repaired the inner fender with a MIG, it does a good and fast job...

You can see the videos here on my website:

http://cadillac1962.com/video.php?video=20170820043220_l.mov
http://cadillac1962.com/video.php?video=20170820042644_l.mov

[MoreRacing]

Welding the inner back sill soport.

[MoreRacing]

Applying CORROSEAL to the right floor pan before welding the patch.

[Ramses]

nice job!

[MoreRacing]

 
Right front floor pan welded and sealed.