Author Topic: Polishing Sabers  (Read 97 times)

Offline Caddy Daddy 55

Polishing Sabers
« on: October 20, 2018, 08:58:18 AM »
Bought some Sabers any tips on polishing them such as brand of polish and technique would be appreciated.

Thanks,

Bob Kielar
Bob K
Keep Cruzin
1955 Fleetwood aka Annie

Offline South_paw

Re: Polishing Sabers
« Reply #1 on: October 20, 2018, 10:14:58 AM »
Chrome sabres? Polish like you would anything chrome plated. Gold anodized? Don't touch em  :P :P :P   
Lou
1956 Eldorado Biarritz
CLC Member since 2001 (Unlisted in Directory)



*** Check out the 1956 Eldorado Biarritz Survivor Roster. Click here ***

Offline walt c

Re: Polishing Sabers
« Reply #2 on: October 21, 2018, 03:39:11 PM »
Bob,
  I've spent quite a bit on polishing equipment and have spent 100s of hours working the art. May I suggest you find a local shop that does plating and talk to them about your wheels. Polishing is a filthy process and also dangerous. Shops that are equipped can do amazing work and do it quick. (experience) Good luck....walt...tulsa,ok

Offline Caddy Daddy 55

Re: Polishing Sabers
« Reply #3 on: November 03, 2018, 06:46:13 AM »
Here are the tools I used to polish the Sabers. The power cone from Mothers was a big help also the dremel tool with a brass wire brush for all the crevices. It took a couple of hours per wheel hopefully you can see the difference between two.

Regards,

Bob K
Bob K
Keep Cruzin
1955 Fleetwood aka Annie